Wear Safety Net For Cone Crusher Important Parts

 

 

Shallow Focus Photo of Baubles on Christmas Tree

Cone crusher is extensively made use of for high solidity mineral ore squashing. And it is extensively utilized for fine or secondary crushing in one crushing assembly line. Typically talking, in one large crushing line, the wear of its cone crusher parts [please click the next page] bushing is really strong which is poor impact the entire manufacturing.

 

 

Typically, the spindle shaft bearing bushing is really simple to use, the streaming has small wear as well as tear, and also the center of it constantly has no wear. so how to stop it to wear is really crucial:

 

 

1. According to the direction, to readjust the space of eccentric shaft bearing, when to check as well as maintenance, you can make bottom void of cone bushing larger, at the very same time guarantee the leading space.
2. When do the maintenance, you must make sure the density of up, center, down the very same.
Adjust the bevel gear clearance to make sure the uniform of gasket.
3. Before starting the maker, to guarantee the tailoring wheel flexibility, and after the maker functioning generally, after that feed into the crushed products.
4. Prior to quit the device, ought to allow the machine discharge all the products from squashing chamber, and also then shut off the power.
5. Take notice of the bearing's temperature level, as well as ensure the bearing in the excellent lubrication condition. And also ought to take note of the noisy as well as vibration. Quit the machine in time as well as inspect if there is anything stuck in the maker or there is any kind of part damaged if there is something unmoral.
6. Keep feeding uniformly; prohibit the steel, timber as well as other unbreakable materials right into the crushing chamber.
7. If the final outcome dimension is a lot bigger than needed, you need to learn the reason, as well as eliminate this phenomenon.
8. When stop the crusher, you should examine whether the bolt is loosened, the wearing parts' damageable level. And also change the wearing components in time and so forth.